
exhibition stand handover
Exhibition Stand Handover: A Practical Pre-Opening Checklist
Cover: a topic-specific illustrative visualisation.
Exhibition stand handover is the point at which the client and delivery team review the completed space together. It should establish what has been delivered, what still needs attention and how the stand will be supported during the event. A quick photograph of the front facade is not a substitute for that conversation.
The checklist below is an operational aid, not a legal acceptance contract or a certificate that specialist technical checks have passed. The agreed scope, current venue requirements and the qualified people responsible for technical works remain the basis of the review.
Start with the approved reference
Bring the current layout, approved design views, scope list and any agreed changes. Record the revision of each document so a late-approved change is not mistaken for a defect, or an obsolete drawing used to excuse an unfinished item. Confirm who is authorised to give the client’s operational approval.
Walk through the stand in the same order a visitor and staff member will use it: approach, entry, product display, conversation area, storage and service points. Include the exhibitor’s products and equipment wherever they are needed to test the layout.
Create a short handover record
- Project reference
- Fair, hall, stand number, client, delivery team, review date and attendees.
- Approved documents
- Drawing revisions, scope reference and accepted changes relevant to this inspection.
- Completed checks
- Items reviewed, the result and the person who carried out any required specialist check.
- Open items
- Clear description, exact location, photograph reference, responsible contact and agreed next action.
- Operational information
- Keys, access arrangements, equipment instructions, support contact and any restrictions staff need to understand.
Keep the record usable on site. An item such as “finish to be improved” is difficult to act on; identify the particular panel, edge or fitting and the expected correction.
Check appearance and everyday use together
- Layout: Confirm display positions, open routes and the arrangement of the meeting and reception areas against the approved plan.
- Surfaces: Review visible damage, unfinished edges and the agreed material or finish references under the working lighting.
- Graphics: Check the correct company name, language, product codes, artwork version and orientation.
- Doors and storage: Open and close them with adjacent furniture in place. Confirm that staff can reach the items they need.
- Equipment: Test screens with their intended content and review lighting with actual products in position.
- Readiness: Check cleaning, packaging removal and the location of client-owned deliveries.
Do not treat an operational walkthrough as an electrical or structural test. Request the appropriate confirmation from the responsible qualified team, and do not put an item into use while a safety-related concern remains unresolved.
Use project photographs as a reference, not an inspection result
The Bayhome HOMETEX 2026 project illustrates a completed stand with a defined facade, display areas and integrated lighting. A photograph can help locate the elements being discussed, but it cannot establish that a door works, an equipment connection has been checked or every surface matches an approved sample.
Give every outstanding item an owner
Distinguish an incomplete agreed item from a new request outside the approved scope. Record the action and its effect on the operating plan; do not rely on a verbal promise passed between several teams. If a change affects technical suitability, the relevant specialist must review it before the team proceeds.
At the end of the walkthrough, make sure both client and site contact can find the same current list. Agree how completed corrections will be checked and who should be contacted if a problem appears during the exhibition.
Include handover in the project brief
Allow for product placement, equipment checks and a client walkthrough in the delivery programme. Our exhibition stand design, production and installation service brings these decisions into the project scope. Send your exhibition brief with the required readiness time and the people responsible for final decisions.



